Removing
1. In the engine compartment: release the cable from the clutch release fork.
2. Box:
- A) Disconnect the cable from the clutch pedal.
- b) Remove the amplifier (1).
- V) Loosen the nut (2) pedal axles.
3. Remove the pedal.
Clutch Pedal Details: 1 - stiffness amplifier; 2 - nut; 3 - cable adjustment mechanism
- after removing the pedal, unhook and remove the spring of the adjustment mechanism. Remember the location of all parts of the mechanism in order to properly assemble them later;
- remove the bushings, remove the sector assembly. Replace damaged parts.
Installation
Installation is carried out in the reverse order of removal, while doing the following:
- install the tip of the cable into place in the gear sector of the adjustment mechanism;
- in the engine compartment, connect the cable to the clutch release fork;
- to set the adjustment mechanism to the working position, press the clutch pedal several times.