Disconnect the supply line between the reservoir and the clutch master cylinder.
Close the tank opening.
Add a small amount of certified brake fluid to the syringe.
Insert the syringe into the supply line between the reservoir and the clutch master cylinder.
Use a syringe to purge air from the clutch master cylinder.
Take out the syringe.
Connect the clutch master cylinder supply line to the reservoir.
Press the clutch pedal five times.
Add fluid to the reservoir up to the maximum level mark.
Check clutch operation. Repeat if necessary.
Install the brake fluid reservoir cap.
Connect the connector of the brake fluid level sensor in the reservoir.
Install the engine undertray.