Loosen the locknut.
Adjust the clutch cable travel by loosening or tightening the nut.
Torque tighten (8 Nm) locknut.
Adjustment check
Using a caliper, measure the distance between the cable sheath stopper and the end of the clutch release fork:
- at the initial position of the clutch pedal;
- with the clutch pedal fully depressed.
Clutch drive adjustment:
1 - adjusting nut;
2 - locknut;
3 - cable sheath stopper;
4 - clutch release fork.
- The travel of the clutch release fork should be equal to: (X) = 29.5 mm±0.5 mm.
Clutch release fork travel