Removing
- disconnect the wire from the negative terminal of the battery;
- remove the center console (see section «Body»);
- disconnect the connector from the cigarette lighter;
- remove the heating element from the cigarette lighter housing;
Figure 8.61. Removing the metal housing of the cigarette lighter
- squeeze the latches through the hole in the panel and remove the metal case of the cigarette lighter from the plastic frame (Figure 8.61);
Figure 8.62. Removing the plastic frame of the cigarette lighter
- release the latches and remove the plastic frame through the front of the panel (Figure 8.62).
Installation
Installation of the cigarette lighter is carried out in the reverse order of removal.