Caution! When performing this operation, wear protective glasses and gloves. Perform all actions in a clean work area to prevent contamination from entering the throttle valve unit.
Remove the throttle body.
Fig. 2.242. Removing the outer rings of the throttle valve block
Remove the outer throttle body sealing rings (fig. 2.242).
Information is located on the website: www.renaultbook.ru
Note: Renault carburetor cleaner will damage seals.
Secure the throttle valve in the open position by hand.
Fig. 2.243. Cleaning the throttle valve unit
Apply the cleaner to the inner surface of the block housing until all traces of dirt are removed (fig. 2.243).
Fig. 2.244. Removing cleaning agent residue from the throttle valve unit
Remove dirt and cleaning agent residue with wipes (fig. 2.244).
Fig. 2.245. Blowing out the throttle valve unit
Blow compressed air around the perimeter of the throttle body, then the outer surface of the housing (fig. 2.245).