Removing
Pic. 8.34. Removing the trim
Detach the decorative trim (pic. 8.34).
Disconnect the seal.
Pic. 8.35. Removing the plastic rivets: 1 - rivets
Disconnect the plastic rivets and remove the wiper arms using the special tool (Ele. 1552) (pic. 8.35).
Remove the air intake grille.
Installation
Attention! Clean the underside of the windshield before installing the air intake grille. Make sure that the air intake recess grille clips do not come into contact with the windshield rib.
Attention! Plastic rivets and clips must be replaced after each removal.
Attention! Before installing the wiper arms, make sure the motor is in the same position as the original position of the wipers on the windshield.
Install the wiper arms to the marks on the windshield.
Torque tighten the wiper arm nuts to 21 Nm.
Installation is made in an order, the return to removal.