Models without turbocharger
Removing
1. Loosen the fixing screws (one of the screws is in the center of the cover) and remove the air filter cover.
2. Remove the filter element from the filter housing.
3. Disconnect the intake manifold air hose from the air filter housing.
4. Disconnect the air hose at the base of the air filter housing and at the front left corner of the engine compartment.
5. Turn away fixing nuts and remove the case of the air filter from an arm in an impellent compartment. If necessary, unscrew the air inlet from the front cross member and also unscrew the bracket.
6. Check up a condition of rubber pillows and replace them as required. Also check the condition of the hoses and clamps.
Installation
1. Install in reverse order.
Models with turbocharger
Removing
1. Loosen the screws and remove the air filter cover.
2. Remove the air filter housing element.
3. Release the strap securing the air filter housing to the bracket.
4. Disconnect the air duct connecting the air filter housing to the turbocharger.
5. Disconnect the air hose from the air filter base and remove the air filter housing from the bracket.
6. If necessary, unscrew the air inlet from the front cross member and also unscrew the bracket.
7. Check up a condition of a belt of fastening, hoses and collars.
Installation
1. Install in reverse order.