Withdrawal (power window regulator)
After removing the inner lining, remove the glass holder A.
Disconnect glass from an axis of a slider of a window regulator.
Raise the glass manually.
Secure it with safety tape.
Remove the three mechanism mounting bolts B (MB head for 10).
Disconnect the power connector.
Remove the power window through the bottom left opening of the door frame.
Installation
Installation is made in an order, the return to removal.
Power window motor initialization
Set the card in the reader to the 2nd fixed position
Close the glass up to the top (glass rises intermittently).
Keep the switch pressed (about two seconds).
Lower the glass to the bottom stop, keep the switch pressed.
The motor has been initialized.
Features of removing a mechanical window regulator
Disconnect glass from an axis of a slider of a window regulator.
Lock the glass in the up position.
Remove the three mechanism mounting nuts C.
Install protection (rag or cardboard) in the area of the upper pin D between the slider and the glass.
Remove the bottom mounting pins.
Move the bottom of the mechanism.
Remove:
- top pin D;
- mechanism node.