- Tightening torque of ignition coil mounting screws: 9±1 Nm
- Monoblock type coil with four outputs
- Primary winding resistance - * 0.5 Ohm
- Secondary winding resistance: 7.2 ±1 kOhm
Figure 3.121. Ignition coil
Ignition coil connector pins:
A - Switch (cylinders 1 and 4);
B - Switch (cylinders 2 and 3);
C - Nutrition;
D - Nutrition (internal chain).
Description
The ignition coil is installed directly on the spark plug of each cylinder. The signal for the new formation is taken from terminals 1 and 32 of the control unit. The signal from terminal 1 controls the ignition timing in cylinders No.2 and 3, the signal from terminal 32 - the ignition timing in cylinders No.1 and 4.