Ceiling lamp without individual lighting
Figure 8.35. Removing the dome light: And – a groove for removal of a plafond; B - groove for removing the diffuser
Unclip the cover from the roof lining using a small screwdriver inserted into slot A as a lever (Figure 8.35), and disconnect the connector. To replace the lamp, remove the diffuser using a small screwdriver inserted into slot B as a lever.
Installation is carried out in the reverse order of removal.
Removal and installation of a plafond with a lantern of individual lighting
Figure 8.36. Removing the ceiling with a lamp for individual lighting: C - groove for removing the ceiling
Figure 8.37. Removing the lamp housing: D - latches; E - fixing paws
Disconnect the lampshade bracket assembly using a small screwdriver inserted into slot C as a lever (Figure 8.36), and disconnect the connector. The ceiling light console is held in the roof lining with four latches D (Figure 8.37) and two fixing tabs E.
Installation is carried out in the reverse order of removal.