Option 1
1. Disconnect the fog lamp connector.
2. Remove two screws (A) headlight mounts, remove the headlight.
Installation is carried out in the reverse order. After installation, adjust the position of the headlight beam by turning the adjusting screw.
Fog lamp support
The fog lamp support is attached to the bumper with three clips (WITH). Clips are installed using Sag pliers. 1521.
Option 2
Figure 8.25. Fog lamp mounting screws
- unscrew the two fixing screws and remove the headlight from the bumper (Figure 8.25);
- disconnect the connector from the headlight;
- turn the plastic cover counterclockwise and remove it;
Figure 8.26. Disconnecting the connector from the fog light bulb
- disconnect the connector from the lamp (Figure 8.26);
- remove the spring clip and remove the lamp by the contact terminals;
Figure 8.27. Fixing the plastic frame of the fog lamp
- to remove the plastic frame of the lamp, unscrew the three nuts of its fastening (Figure 8.27).
- Install in the reverse order of removal, taking into account the rules for handling halogen lamps.