Figure 8.28. Rear light connector
In the luggage compartment, remove the rear light mounting bolt. From outside the vehicle, disconnect the lamp from the body by removing it from the guide tabs. Disconnect the connector (Figure 8.28).
The lantern connector terminals are numbered from bottom to top.
- Terminal 1 - fog lamp.
- Terminal 2 - "Earth".
- Terminal 3 - reversing lamp.
- Terminal 4 - dimension.
- Terminal 5 - brake light.
- Terminal 6 - turn indicator.
Figure 8.29. Moving the latches and removing the lamp socket assembly
Slide the latches, remove the lamp holder unit and remove it from the lamp (Figure 8.29). Replace the defective bulb and install the tail light in the reverse order of removal.