- place the car on a lift or raise the front of the car, place supports under the body;
- disconnect the wire from the negative terminal of the battery;
- remove the right front wheel and mudguard;
- remove the radiator grille;
Pic. 8.2. Lower cross member bolts
- remove the upper cross member by unscrewing the two lower mounting bolts and place it on the engine (pic. 8.2);
- remove the protective casing of the fuel distribution rail;
- remove the right headlight;
- remove the accessory drive belt (see section «Vehicle maintenance»);
- remove the power steering pump pulley;
- Remove the fuel supply line from the injection rail using tool Mot. 1311-06 and disconnect the injector connector (pic. 8.3);
Pic. 8.3. Injector connector
- unscrew the bolts securing the power steering pump to the bracket;
- remove the bolt securing the power steering pipe to the multifunction bracket;
- remove the alternator mounting bolts by moving the power steering pump aside.
Installation of the generator is carried out in the reverse order of removal.
Tension the alternator drive belt.