Tightening torques | |
Alternator mounting bolts | 21 Nm |
Nuts of fastening of a wire of the generator | 14 Nm |
Removing
Disconnect the battery.
Remove the accessory drive belt.
Remove:
- nut (1) generator wiring harness
- generator wire.
Disconnect connector (2).
Loosen the top bolt (3) generator mounts.
Loosen the alternator lower mounting bolt (4).
Remove the alternator with the lower mounting bolt.
Installation
drown the rings (5) generator for easy installation.
Install:
- alternator with bottom mounting bolt,
- upper alternator mounting bolt.
Torque tighten the alternator mounting bolts (21 Nm).
Connect the generator connector.
Set the generator output.
Torque tighten the alternator wire fastening nuts (14 Nm).
Install the accessory drive belt.
Connect the battery.