Removal the piston pins (Renault Megane 2)

Remove the piston rings with piston ring pliers.

Install the piston assembly with the connecting rod on the prism of the device (Mot. 574-22).

Align the piston pin with its outlet hole in the prism.

Fig. 2.153. Pressing out the piston pin: 1 - prism; 2 – mandrel

Using a press, press out the piston pin with the tool's mandrel (Mot. 574-22) (fig. 2.153).

Original publication on the website RENAULTBOOK.ru

This article is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Article has been reviewed by editor: Kupriyanov Sergey

Share with friends:

Megan 2: Engine repair

Checking the diameter of the crankpins
Checking the diameter of the main journals
Checking the diameter of the crankshaft main bearing supports
Checking the mating surface of the cylinder block
Removal the piston bottom cooling nozzles

Checking the clearance between the piston rings and the piston grooves
Checking the clearances in the piston ring lock
Installing nozzles for cooling the piston bottom
Installing injectors for cylinders 2 and 4
Direction of installation of crankshaft main bearing shells