Removing
1. Disconnect the ground cable from the battery.
Attention! If the radio in your car is coded, make sure you know the code before disconnecting the battery.
2. Remove a steering wheel and casings of a steering column as it is described in the Head Suspension and steering.
3. Disconnect the wiring connector from the ignition switch.
4. Turn away and remove a fixing bolt of the lock of ignition.
5. Insert the ignition key and turn it to the "3".
6. Press the side clips and remove the ignition switch along with the electrical wiring.
Installation
1. Install in reverse order. Make sure the wiring is properly routed.