Removing
Disconnect the battery. Remove the intake silencer.
Disconnect the brake booster vacuum hose 1 (from the collector side).
Remove:
- lug mounting 4 oxygen sensor connectors to facilitate the passage of the air filter housing;
- air filter.
Turn off bolts 2 fastenings of the case of the air filter.
Slide the air filter housing to the right to remove it. The air filter housing can fit between the windshield opening, the engine and the brake booster.
Installation
Installation is made in an order, the return to removal.
Tighten the mounting bolts, observing the tightening torque.
Note. Take precautions not to damage the suction pipe for the brake booster on the intake manifold. If the pipe is broken, then the collector must be replaced.