- disconnect the battery;
- remove the lower oxygen sensor;
- cut the exhaust pipe as described in the general information.
Before reinstalling the element, check that there is no dirt or metal particles in the exhaust pipe.
When replacing the catalytic converter, replace the gasket at the catalyst inlet.
A previously installed clutch cannot be reused.
Note. When assembled, the coupling bolt and nut must be oriented so that they do not come into contact with the bottom of the body.
Tighten the coupling, taking the pressure off the exhaust pipe and making sure it is properly aligned.
Check the security of fastening and the presence of all heat shields of the exhaust system.
Check after installation is complete. that the exhaust pipe does not come into contact with the underbody anywhere.
Attention! A damaged heat shield must be replaced.
Removal and installation of other elements of the exhaust system is not difficult.