Removing
Remove:
- upper engine covers;
- air line between air filter housing and turbocharger.
Disconnect the battery.
Disconnect the wiring harness from the exhaust gas temperature sensor 1.
Disconnect:
- block of wires from the strut;
- turbocharger wiring harness 2.
Unscrew temperature sensor 3 with a wrench.
Installation
Install the exhaust gas temperature sensor.
Using a wrench, torque the exhaust gas temperature sensor to 30 Nm.
Fasten:
- block of wires on the strut;
- wiring harness on the turbocharger.
Connect the wiring harness to the exhaust gas temperature sensor.
Install the air line between the air filter housing and the turbocharger.
Connect the battery.
Install the engine top covers.