Removal
- Remove the hub/brake drum.
- Disconnect the brake pipe from the brake wheel cylinder
- Unscrew the nut of the lower fastening of the brake shield and mark its position
- Remove the 6 bolts securing the rear wheel hub axle.
- Disconnect the electrical connector from the sensor.
Pic. 12.32. Location of the rear wheel speed sensor mounting bolt
- Use a cord to secure the rear wheel hub axle to the rear suspension elements.
- Remove the sensor mounting bolt.
- Remove the sensor.
Installation
- Clean the mating surface of the sensor and the rear wheel hub axle.
- Lubricate the hole in the rear wheel hub axle to install the sensor.
- Install a new sensor.
- Screw in the sensor mounting bolt, having previously lubricated its thread with a blocking agent.
- Install and secure the rear wheel hub axle with 6 bolts.
- Screw in the lower brake shield mounting bolt.
- Connect the brake pipe to the brake wheel cylinder.
- Install the hub/brake drum.
- Connect the electrical connector to the sensor.
- Remove air from the brake system.
- Install the wheel.