- deactivate the system (see above);
- remove the front seat;
- remove the front seat cover;
Pic. 9.120. Disconnecting the connector from the pretensioner assembly
- disconnect the wiring connector on top of the pretensioner assembly (pic. 9.120) and pass the wiring through the overlay (leave the wiring attached under the seat);
Pic. 9.121. Removing the pretensioner mounting bolt from the seat frame
- unscrew the bolt securing the pretensioner assembly (pic. 9.121), remove the assembly from the seat frame.
Installation order:
- pass the pretensioner wiring through the slot in the seat pad and connect the connector to the block;
- install the unit in the seat, screw in and tighten the mounting bolt;
- install the seat cover;
- install the seat;
- activate the system as described above.