Remove:
- battery;
- battery shelf;
- air filter housing.
Remove the brake fluid from the reservoir with a syringe.
Substitute the container for the brake fluid that remains in the master cylinder.
Disconnect the supply line from the clutch master cylinder at the point (1).
Disconnect the brake fluid level sensor connector at the point (2).
Remove:
- bolt (3) fastening of a reservoir of a hydraulic drive of brakes;
- brake fluid reservoir.
Remove:
- rigid pipeline fittings in current (4);
- fastening nuts (5) master brake cylinder;
- master brake cylinder.
Install the plugs on the master cylinder bores and on the brake lines.
Replace the master cylinder gaskets on the side of the reservoir of the hydraulic drive of the brakes and on the side of the vacuum brake booster.
Install:
- a reservoir with a brake liquid on the main brake cylinder;
- master brake cylinder assembly with reservoir.
Torque tighten the brake reservoir reservoir bolt 4 Nm.
Install:
- nuts of fastening of the main brake cylinder;
- fittings of a rigid pipeline;
- master cylinder pipeline.
Torque tighten:
- nuts of fastening of the main brake cylinder 27 Nm;
- fittings of brake pipelines 14 Nm.