Drive devices (Renault Espace III)

Fig. 15.36. Location of headlight adjustment screws in vertical (1) and horizontal (2) planes

• Tighten the headlight adjustment screw in the vertical plane (1. Fig. 15.36) maximum 10 revolutions
• Rotate the actuator one eighth of a turn and remove it from the headlight assembly.
• Disconnect the headlight ball joint by pushing the actuator slightly.
• After replacing the drive unit, it is necessary to initialize the system and adjust the headlights

Caution: When working under the rear of the vehicle, disconnect the link from the anti-roll bar and/or cross guide rod.