Removing
1. The general course of the description applies to all models. However, some differences may appear during the build process.
2. Disconnect the negative cable from the battery.
3. Drain the coolant from the cooling system (see chapter 2).
4. Remove shield, top cross member and front body panel to free radiator.
5. Disconnect hoses and air ducts from the heater.
6. Disconnect the wiring from the thermal switch in the radiator and from the fan motor.
7. Remove the fan mount, carefully slide the radiator into the engine compartment, then remove it. Be careful not to damage the radiator core while doing this. Remove the rubber mounting parts. Separate (if any) engine oil cooler hoses. Collect the leaking liquid.
8. If the heatsink needs to be replaced, remove the fan and thermal switch from the heatsink.
Installation
9. Install in reverse order. Fill the system with coolant as described in Chapter 2.