Removing
1. Remove the inner door trim (see chapter 7).
2. Remove the sealing brushes at the top of the door frame.
3. Install the glass in a position where the lower glass mounting bolts in its holder will be visible. In cars of later releases, there are special holes for this. Loosen these bolts (see illustration).
11.3 Front door glass bolts
4. Remove the glass from the outside by grasping the top corner and turning it slightly forward.
5. When installing new glass, check for the presence of a mounting clip on it. In case of its absence, rearrange the clip from the old glass. In this case, the rear edge of the clip should not reach the edge of the glass by 200 mm (in cars of the 1st and 2nd stages of production) or 225 mm (in cars of the 3rd stage of production).
Installation
6. Installation is carried out in the reverse order.