Contents: Removal 🠛 Installation 🠛
| Tightening torques | |
| Bolts securing the right pendulum support to the engine | 62 Nm |
| Bolts securing the right pendulum suspension support to the body | 62 Nm |
Removal
Remove the top engine cover.
Fit the engine support device (Mot. 1453) with a safety strap and use the lifting eye on the timing side as an attachment point.
Disconnect the fuel line at point (1).
Plug the holes with plugs.
Disconnect the fuel lines from the holder at points (2).
Move the fuel lines to the side.
Mark the position of the right pendulum suspension support on the body.
Remove:
- bolts (6) securing the right pendulum support to the engine,
- bolts (7) securing the right support of the engine pendulum mount to the body,
- right support of the engine pendulum mount.
Installation
Install:
- the right pendulum suspension according to the marks on the body made during its removal,
- bolts securing the right pendulum support to the engine,
- bolts securing the right pendulum suspension support to the body.
Tighten the right engine swingarm support mounting bolts to the specified torque in the specified order (62 Nm).
Tighten the bolts securing the right pendulum support to the body to the required torque (62 Nm).
Install the fuel lines.
Secure the fuel lines to the holders at point (2).
Remove the plugs.
Connect the fuel lines at point (1).
Remove the engine support device (Mot. 1453) and the retaining strap.
Install the top engine cover.