Tightening torques | |
Lower strut mounting bolts | 21 Nm |
Upper strut nuts | 21 Nm |
Removing
Lock the airbag computer.
Disconnect the battery.
Remove:
- driver's frontal airbag,
- steering wheel,
- steering column switch assembly,
- dashboard,
- compartment for small items
- audio system.
Remove:
- screw (1) fixing the board of the relay of heating elements of interior heating,
- relay board for interior heating elements.
Disconnect:
- wiring harness at point (2),
- connector (3) the ignition switch from the bracket.
Partially raise the floor mat to gain access to the strut mounting bolts.
Make a mark between the brace and the plate welded to the tunnel to ensure installation is in the original position.
Remove:
- top nuts (4) strut mounts,
- bottom bolts (5) strut mounts,
- hydraulic cylinder
Disconnect connector (6) heating element in the direction of the arrow.
Remove:
- bolts (7) fixing heating elements for interior heating,
- interior heating elements.
Installation
Installation is made in an order, the return to removal.
Torque tighten:
- lower strut mounting bolts (21 Nm),
- top strut nuts (21 Nm).
Make sure the mat is placed under the accelerator pedal stop.
Unlock the airbag computer.