Removing
1. Disconnect the battery.
2. Remove the steering column cover (three screws).
3. Remove the immobilizer antenna from the ignition switch.
4. Remove two bolts (A) mount the cleaner switch.
5. Remove the switch from the latches and disconnect the wiring connector.
Note. The steering wheel does not need to be removed.
Installation
6. Installation is carried out in the reverse order.
Switch connector pins
Terminal | Description |
A1 | Low speed intermittent wiper |
A2 | High cleaner speed |
A3 | Low speed purifier |
A4 | Windshield washer pump |
A5 | Not used |
A6 | Front wiper timer |
A7 | Windshield Wiper Power (with the ignition on) |
IN 1 | Rear window washer pump |
AT 2 | Rear wiper timer |
AT 3 | Not used |
B4 | not used |
AT 5 | "Earth" |
AT 6 | Not used |
AT 7 | not used |