Removing
Note. To remove the manifolds, the turbocharger must be removed. The intake and exhaust manifolds cannot be removed separately.
Disconnect:
- battery;
- air supply pipe from the engine stop damper body;
- exhaust gas recirculation solenoid valve.
Remove the bolt 1 securing the immersion heater housing and move it aside.
Remove the engine stop damper housing 2, the EGR solenoid valve connector 5.
Disconnect the EGR hose and remove the lifting eye.
Loosen the manifold stud nuts.
Installation
Installation is made in an order, the return to removal.
Replace the manifold gasket and install it correctly in place, as well as the EGR valve gasket and the stop valve housing gasket.