Disconnect the suspension arm ball joint from the steering knuckle. Remove the ball joint from the steering knuckle.
Loosen the fastening nut (3) tie rod ball joint pin.
Disconnect the tie rod ball joint from the steering knuckle using a puller (Tav. 476).
Remove:
- bolts (4) mounting the lower suspension arm;
- lower suspension arm.
Replace the front lower control arm bolt and nuts. When installing, tighten the lower suspension arm mounting studs to 180 Nm to the required torque.
Insert the ball joint of the suspension arm into the steering knuckle.
Torque tighten the ball joint nut of the lower control arm 62 Nm.
Install the tie rod on the steering knuckle and torque the tie rod nut to 37 Nm.