- lower trim of the dashboard;
- left front air duct supplying air to the legs;
- bolts of the lower fastening of the amplifier beam of the dashboard;
- bolts of the upper fastening of the amplifier of the dashboard beam;
- dashboard beam reinforcement.
Remove the evaporator temperature sensor (1), by turning it a quarter of a turn counterclockwise.
Remove the evaporator temperature sensor from its socket.
cut the wires (2) evaporator temperature sensor.
Solder the wires of the evaporator temperature sensor and install it in the socket.
Install the parts in reverse order.
Torque tighten the bolts of the upper and lower mountings of the dashboard beam reinforcement 21 Nm.