Remove:
- lower trim of the dashboard;
- left front duct for air flow to the legs.
Remove the brake pedal buffer bolt (1).
Remove the connecting shaft ring and double stop connecting shaft (2), vacuum booster.
Loosen the nuts (3) brake pedal mountings.
Note. Do not disconnect the brake pedal and accelerator pedal connectors and replace the brake light switch if it is damaged.
Partially remove the brake pedal. Disconnect the cabin blower control unit at the point (4).
Disconnect connector (5) from the cabin electric fan control unit.
Replace the connecting shaft between the brake pedal and the brake booster rod and the brake pedal buffer bolt.
Install the parts in reverse order.