Removal
Removing the cooling system kit and radiator for the Z7X engine is similar to the procedure for the F3R engine, except for the following differences:
- The thermal switch is located on the right side of the radiator;
- Due to the large size of the engine, access to the water separator reservoir mounting bolt is limited.
Installation
- Installation is carried out by two people, in the reverse order of removal.
- If necessary, lubricate the upper rubber fasteners on the headlight mounting panel.
- Charge the air conditioning system with refrigerant and the engine cooling system with coolant.
- Install the battery and connect the wires to the battery terminals.
- Bleed the cooling system and check for leaks in the engine cooling and air conditioning systems.