On vehicles with long rail supports, there are notches spaced every 2.5 cm to allow the seat to be blocked. There are two types of long guides: short guides with one channel and long guides with two channels.
Four rear supports allow two seats to be positioned vertically.
Removal
Lower the headrest until it rests against the seat back and, if necessary, remove the armrest. Tilt the seat back forward. Pull the strap horizontally, lift the handle and move the seat forward.
Using the crossbar, release the seat brackets from their supports, lift the rear part of the seat, press the lever for securing the front supports and remove the seat from the car interior.
Rear seat backrest release handle
Strap for unlocking the rear seat fastening to the support
Removing the rear seat
Before installing the seats, make sure the supports are clean. Install the front brackets of the folded seat into the supports, move the switch to the rear and lower the rear part of the seat using the crossbar, and the rear seat mounting brackets should lock. Check that the four seat supports are securely locked.
When installing the seat, two positions are possible: the seat is moved forward or moved back.
Vehicles equipped with grooved guides
To ensure the correct position of the four seat supports, the guides must be installed face to face. To move the guide and install it correctly, use the key located in the trunk niche, behind the right rear wheel, next to the jack.
Location of seat supports: A - supports for attaching the front seat brackets; B - supports for attaching the rear seat brackets; 1 - installation locations for the seat moved forward; 2 - installation locations for the seat moved back
Types of rear seat locations on a vehicle equipped with point supports
Types of rear seat arrangement on a vehicle equipped with guides with gutters: A - four seats installed in the front part on long guides with gutters, while the movement of the rear seats is limited by projections 2; B - five seats, with the central seat mounted on long rails with gutters, while the movement of the rear seats is limited by the presence of a rear mount: C - four seats installed behind long guides with gutters, and movement is limited by the front fastenings; D - five seats, with the central seat mounted on long guides with gutters, and movement is limited by the front fastenings: AD - front clearance; DR - rear clearance