Front seat head restraints
Headrest A height adjustment. Press latch 1 and move the head restraint at the same time.
Removing headrests A or B
Depending on the vehicle equipment, press the latches 1 and 2 of the headrest guides or button 3 or button 4, raise the headrest and remove it (lean back if necessary).
Replacing headrests A or B
Insert the rods 2 of the head restraint into the holes in the guide bushings (lean back if necessary). Insert the head restraint until it locks into place.
Rear seat head restraints
Headrest A height adjustment. Press latch 1 and slide the head restraint at the same time.
Removing headrests A
Simultaneously press tabs 1 and 4 and pull out the head restraint.
Removing headrest B
(depending on vehicle configuration)
Simultaneously press the latches 2 and 3 of each head restraint rod, then pull out the head restraint.
Headrest operating position B
(depending on vehicle configuration)
Raise the head restraint to the locked position to use it in the up position. Simultaneously press locks 2 and 3 and fully lower the head restraint.
Head restraint position B
(depending on vehicle configuration)
The lowest position of the head restraint is inoperative and should not be used if there is a passenger in the rear seat.
Replacing headrests A and B
(depending on vehicle configuration)
Insert the headrest rods into the guide bushings, press the lock of each rod and lower the headrest to the desired height.