- Until December 1987 - 26.0 mm
- First generation since January 1988 - 34.5 mm
- Other models - 35.0 mm
Press in the new bushing so that it protrudes the same amount on each side of the control arm «A» (see illustration):
- Models up to December 1987 - 6.0 mm
- First generation since January 1988 - 7.5 mm
- Other models - 7.5 mm
9.1 Installing the rubber bushing in the upper control arm. Pay attention to the difference in diameters «D» and the protruding surface of the sleeve «A»