Attention: The operations described below apply only to cars of the 3rd stage of production.
Mirror glass
Removing
1. Insert a thin-blade screwdriver between the mirror glass and the lower edge of its frame, and remove the metal mounting rim by pushing it inside the mirror housing.
2. Remove the glass from the slot.
Installation
3. Install the metal rim on the lugs of the mirror housing (see illustration). Set the glass to the desired position by pushing it from the outside.
18.3 Install the metal rim on the projections of the mirror housing
Mirror Motor
Removing
4. Remove an external rear-view mirror.
5. Remove the glass from the mirror housing (see above).
6. In mirrors with manual adjustment: unscrew 4 screws securing it, unfasten the cables from the buttons, remembering their location, and remove the drive mechanism (see illustration).
18.6 Access to the mirror fixing screws is open through the disc holes
7. On power mirrors: remove 3 screws, disconnect connector and remove motor.
8. To remove the mirror housing, unscrew the 5 screws inside the mirror and remove the front trim. Unscrew 4 screws hidden under the trim and 7 screws of the second (motionless) parts of the mirror cover. Separate the body parts.
Installation
9. Installation is carried out in the reverse order.