Cars of the 1st and 2nd stages of production
Removal
1. Open the hood and remove the 4 bolts along the top edge of the radiator grille (in cars of the 1st stage of production) or 4 bolts from the front side of the grille (in cars of the 2nd stage of production).
2. Loosen the nuts on each side of the radiator grille mount to the headlight bracket posts and remove the grille.
Installation
3. Installation is carried out in reverse order.
Cars of the 3rd stage of production
Removal
4. Open the hood and remove the seal (see illustration).
26.4 Open the hood and remove the seal
5. Remove the grille sides by unscrewing 2 screws on each side (see illustration).
26.5 Remove the grille sides by unscrewing 2 screws on each side
[View the original on the specified resource: RenaultBook.ru]
6. Loosen the screws at the top and bottom where the headlights are attached (see illustration). Remove the radiator grille.
26.6a Unscrew the screws at the top near the headlights...
26.6b... below near the headlights...
26.6s...and remove the radiator grille
Installation
7. Installation is carried out in reverse order.
