Removing
1. Remove forward indexes of turn, the corresponding chapter see.
2. Unscrew the two bolts D and bolt E with a T20 screwdriver (see illustration).
4.2 Unscrew the two bolts D and bolt E with a T20 screwdriver
3. Release the grid from clamp F (see illustration 4.2).
4. Release the lower part of the grille at the G points by prying it out with a screwdriver, and then detach the sides at the I points (see illustration).
4.4 Release the lower part of the grille at points G by prying it with a screwdriver, and then detach the sides at points H
If the car is equipped with an anti-theft system, then there is a hood contact switch on the right half of the radiator grille. This switch is removed as follows:
5. Squeeze the three tabs J and remove the switch, and then disconnect the plug (see illustration).
4.5 Squeeze the three tabs J and remove the switch, and then disconnect the plug
6. Carefully remove the grille.
Installation
7. Fix the grate in the latches, and then screw in the mounting bolts.
8. Connect the plug of the contact switch of a cowl and establish the switch into place.
9. Establish forward indexes of turn.