Contents: Removal 🠛 Installation 🠛
Removal
1. Remove the door trim by prying it off with a wide screwdriver (see illustration).
24.1 Remove the door trim by prying it off with a wide screwdriver
2. Remove the front mounting bolt cap and also remove the foam seal. For mirrors with manual position adjustment, you also need to remove the rubber ring.
3. Remove the three screws A holding the mirror (see illustration).
24.3 Remove the three screws A holding the mirror
[This article is taken from the website: renaultbook]
4. Remove the mirror. For electrically operated/heated mirrors, the plug must be disconnected.
Attention! In vehicles with an on-board computer, there is an outside air temperature sensor in the right side mirror.
Installation
5. Install the mirror in place and insert the drive lever or power plug into the hole and secure the mirror with screws.
6. Replace the foam seal and rubber ring.
7. Connect the plug.
8. Put the trim in place near the door glass and fix it with three clips. If necessary, tap the trim with your palms.