Removing
1. Disconnect the tube from the windshield washer and take it to the side.
2. Mark the hood bolt locations with a pencil to facilitate subsequent installation.
3. Supporting a cowl together with the assistant, turn away bolts of its fastening and remove a cowl from the car.
Installation
4. Install the hood on the car, insert the bolts of its fastening into their holes and slightly tighten them, being guided by the marks made. Connect the tube to the windshield washer.
5. Close the hood and check its installation. The holes between the hinges and the hood are designed to control the installation of the hood. Height adjustment of the hood is carried out with the help of rubber pads.