Identification
Removing
Place the car on a two post lift.
Disconnect the battery.
Remove:
- engine cover;
- engine undertray protection:
- strut 1. then catalytic converter 2.
Remove:
- pads of wires from the starter;
- air duct A by disconnecting hose B from the crankcase ventilation reservoir.
Turn away a bolt of fastening 3. air lines With and D respectively from a turbocompressor and from an inlet collector. then take them aside.
Remove:
- «mass» tire 4.
- starter mounting bolts 5,
- starter.
Installation
Installation is made in an order, the return to removal.
When installing, make sure that the installation sleeve is present.