Remove the crankcase ventilation hose clamp (1) on the cylinder head cover with remote gripping pliers for elastic bands (Mot. 1448).
Disconnect:
- crankcase ventilation hose from the cylinder head cover;
- evaporative emission system hose from the intake manifold at the point (2).
Disconnect the crankcase ventilation hose from the turbocharger air outlet pipe.
Disconnect the crankcase ventilation hose.
Disconnect the evaporative emission system hose:
- from the outlet pipe at the outlet of the air filter at the point (3);
- from the cylinder head cover at the point (4).
Disconnect the evaporative emission hose from the turbocharger air outlet.
Remove the evaporative emission hose.
Remove mounting bolt (5) exhaust air duct of the turbocharger to the cylinder head.
Remove the turbocharger air outlet duct bolt (6) on the intake manifold.
Remove the turbocharger air outlet pipe clamp by pulling on both ends.
Remove the cooler air inlet clamp by pulling on both ends.
Remove the turbocharger air outlet pipe.
When installing, tighten to the required torque:
- bolt for fastening the exhaust air duct of the turbocharger to the intake manifold 8 Nm;
- turbocharger air outlet duct to cylinder head cover 8 Nm.
Install the parts in reverse order.