The system informs the driver via display 1 and on-board computer 2 of normal tire pressure and warns in the event of insufficient pressure or a puncture.
Indication
Display 1 on instrument cluster (Megane III) and on-board computer 2 report a possible deviation from the normal tire pressure (insufficient tire pressure, tire puncture, system malfunction, etc.).
«Adjust tyre pressure»
A completed wheel designation F indicates that the tire pressure is insufficient.
«Inflate tyres for motorway»
The tire pressure of the four wheels F is higher than normal, the tire pressure does not match the driving speed. Reduce your speed or adjust the four tire pressures to match «highway pressure» (see the label on the end of the driver's door).
«Puncture»
The designation of the wheel F indicates that a wheel is punctured or the pressure in it is extremely low. Replace the wheel or contact the service station if it is punctured. Pump up the wheel if the tire pressure is not enough,
This message is accompanied by the warning light «STOP».
«Tyre pressure sensors absent» or «Check tyre pressure sensors»
In wheel E, the symbol of which has disappeared, there is no sensor or the sensor is defective (e.g. if a spare wheel is fitted).