Removing
1. Remove the bellows from the shift lever (see illustration). While removing the console, the cover can remain on the lever, but it must be lifted up.
21.1 Removing the boot from the gear lever
2. Remove the plastic button at the front of the parking brake lever and remove the screw (see illustration).
21.2 Remove the plastic button at the front of the parking brake lever and remove the screw
3. Loosen the screw located in the center and back of the console base (see illustration).
21.3 Loosen the screw located in the center behind the console base
4. Move the console back so that the centering fastening element under the instrument panel becomes visible. Once there is enough room for the parking brake lever and shift lever to pass through, remove the console.
Installation
5. Installation is carried out in the reverse order.