box type | Refueling gear capacity, l |
JR5 | 2,5 |
Change of oil
Place the car on a two post lift.
Remove:
- bolts of fastening of protection of the pallet crankcase of the engine,
- protective screen.
Install the crankcase ventilation pan under the transmission.
Loosen the drain plug (1).
Give oil to the crankcase ventilation pan.
Refueling
Be sure to replace the drain plug seal.
Install the drain plug with a new gasket.
Torque tighten the drain plug (22 Nm).
Remove the filler cap (2).
Fill the gearbox up to the bottom edge of the hole with oil recommended by the manufacturer.
Close the filler cap.
Wipe off any oil spills with a rag.
Remove the crankcase ventilation pan.
Install the engine undertray.