Removing
Place the car on a two post lift.
Remove:
- pallet protection bolts; crankcase,
- protective screen.
Drain the gearbox oil.
1 - In case of replacement of the differential flange oil seal on the left side
Remove:
- left front wheel
- drive shaft of the left front wheel.
2 - In case of replacement of the differential flange oil seal on the right side
Remove:
- right front wheel
- drive shaft of the right front wheel.
Tap the gland on the base with a punch and a small hammer so that the gland turns in the socket.
Remove the oil seal with a screwdriver, being careful not to scratch the differential case.
Installation
Parts that must be replaced: Differential flange seal.
Install the differential flange seal using the tool (1) with A on the right side and B on the left side.
Tap the fixture with a bronze drift (2), to completely press in the new differential flange seals.
Installation is made in an order, the return to removal.
Pour oil into the gearbox.