Tightening torques | |
Bolts of fastening of the right support of a pendular suspension bracket to the engine | 62 Nm |
Bolts of fastening of the right support of a pendulum suspension bracket to a body | 62 Nm |
Removing
Remove the engine top cover.
Install Engine Support Tool (Mot. 1453) with a tether strap and use the lifting eye on the timing side as an attachment point.
Disconnect at a point (2):
- fuel supply line,
- piping of the gasoline vapor recovery system.
Mark the position of the right pendulum support on the body.
Remove:
- bolts (3) fastening the right support of the pendulum suspension to the engine,
- fastening bolts (4) right support of the pendulum suspension of the engine to the body,
- the right support of the pendulum suspension of the engine.
Installation
Install:
- the right pendulum suspension according to the marks on the body made during its removal,
- bolts of fastening of the right support of a pendular suspension bracket to the engine,
- bolts of fastening of the right support of a pendulum suspension bracket to a body.
Torque tighten:
bolts of fastening of the right support of a pendular suspension bracket to the engine (62 Nm),
bolts of fastening of the right support of a pendulum suspension bracket to a body (62 Nm).
Fasten:
- fuel supply line,
- piping of the gasoline vapor recovery system.
Remove engine support (Mot. 1453).
Install the engine top cover.