Contents: Removal 🠛 Installation 🠛
Removal
Remove:
- wheels;
- brake calipers (see brake pad operations);
- two bolts securing the shoe guide;
- hub cap;
- hub nut (using a 36mm socket);
- rear wheel hub - brake disc assembly.
Installation
Installation is carried out in the reverse order of removal.
Caution! Before driving the vehicle, press the brake pedal several times to set the wheel cylinder pistons to the working position.
Please note: These vehicles use hubs with built-in bearings.
Attention! The bearing and the brake disc cannot be separated, therefore if one fails, the entire unit must be replaced.