Removal and installation front brake pads (Renault Laguna 2)

Removal

Remove:

• the pressure spring from the front of the brake caliper;
• brake hose of shock absorber strut;
• two protective caps for the guide pins;
• two bolts for fastening the guide pins.

Hang the brake caliper and remove the brake pads.

Installation

Caution: Securely fasten the brake hose and ABS sensor wires if they were disconnected.

Check the condition of the brake system components.

Move the piston into the cylinder until it stops using the Ere. 823 device.

Install new brake pads, starting with the inner pad.

Install:

• guide pin mounting bolts, starting from the bottom;
• the pressure spring onto the front of the bracket, starting from the bottom.
• The brake caliper is installed in the reverse order of removal.

Caution! Before driving the vehicle, press the brake pedal several times to set the wheel cylinder pistons to the working position.